Model VSI and IVSI are available in eighteen sizes, from 5″ I.D. to 48″ I.D. Fittings include various elbows, tees, supports and terminations, as well as a variety of accessory fittings designed to make installation simple and quick. Each component is shipped complete and ready for installation. Each ordered part includes Inner Vee Bands, Outer Channel Bands and all the necessary hardware. Please visit http://www.ampcostacks.com/ for more information.
Approved for residential use, thousands of homeowners have installed Beacon/Morris BRT units in their garages. By design, our BRT units are compact and fit nicely in the corner of a garage. The unique hanging mechanism allows the installer to mount the unit close to the ceiling, further keeping the heater out of the way of the homeowner. Most commonly, BRT garage heaters are used with natural gas. If natural gas isn’t available, units are available for use with propane as well. Beacon/Morris unit heaters not only keep your garage environment comfortable, but also may help prolong the life of your car’s engine by eliminating cold start-ups in the dead of […]
The “BMED” and “BMES” are power vented indoor duct furnaces. Model “BMED” offers bottom burner access and is typically ceiling suspended. The model “BMES” offers side access and is typically mounted on a non-combustible floor. Both models offer high efficiencies that achieve annual fuel savings of up to 25% over conventional natural vented unit heaters. Also featured is the factory installed power venter and sealed flue collector that controls combustion and excess air during on cycles. Standard Features: 10 sizes ranging from 100-400 MBH ETL certified for 80% efficiencies Aluminized steel heat exchanger 20 gauge Optional 409 and 321 stainless steel heat exchangers Single stage gas valve (STD) Optional two […]
The model “BMEB” high efficiency unit heater achieves annual fuel savings of up to 25% over conventional natural vented unit heaters. The “BMEB” features a factory installed power venter and sealed flue collector that controls combustion and excess air during on cycles. Standard Features: 10 sizes ranging from 100 to 400 MBH ETL certified for 80% efficiencies Aluminized steel heat exchanger- 20 gauge Optional 409 and 321 stainless steel heat exchangers Single stage gas valve (STD) Optional two stage and modulating gas valves Standard spark ignition Available in Natural or LP gas Easy burner access with individual removable burners Optional duct flange connection in lieu of discharge louvers 1O year […]
The “BTU” is a propeller type unit heater that combines the latest tubular heat exchanger and inshot burner technology with the quality and reliability you have come to know with Beacon/Morris. Standard Features: 20 gauge tubular heat exchangers 9 sizes ranging from 100 to 400 MBH Inshot type burner Direct spark ignition system 20 gauge jacket panels with baked enamel finish Power vented Easy access control panel Certified for category I and III venting Terminal strip low voltage wiring 82%+ thermal efficiency 10 year warranty Factory fire tested
Functioning as a durable case mounted analyzer, the ecom-B is built for boiler tuning and efficiency. Powerful magnets on the back of the analyzer allow the technician to work hands free during any combustion analysis for increased efficiency. Like all of our analyzers the ecom-B utilizes the newest technology and world-class engineering, ensuring your testing is easy and accurate. Available with up to three sensors, this ready to run analyzer has everything you need in one compact, robust and easy to use carry case.
The ecom-B Plus is an easy to use handheld gas analyzer designed for commercial and industrial combustion monitoring in a variety of applications. It can be fitted with up to 3 gas sensors, measuring O2, CO & NO, plus STACK and AMBIENT temperatures, and STACK Pressure and Draft. The ecom-B Plus also calculates CO2, Efficiency, Losses, Excess Air and Oxygen correction 0-20%. The instrument with its aluminum housing and ergonomic handle has been designed for rugged field use. On board data storage allows for up to 300 separate readings. Its integrated thermal quick printer allows for on the spot print outs. The on-board computer has 5 pre-programmed fuel types and […]
The ecom-CL 2 – the perfect combination of wall positioned and floor standing instrument. It is an easy to use gas analyzer designed for commercial combustion monitoring in a variety of applications. The ecom-CL 2 is fitted with up to 3 gas sensors, measuring O2, CO & NO, plus STACK and AMBIENT temperatures, and STACK Pressure and Draft. The ecom-CL 2 also calculates CO2, Efficiency, Losses, Excess Air and Oxygen correction 0-20%. The on-board computer has 5 pre-programmed fuel types and can store up to 16. The ecom-CL 2 sample conditioning system consists of a high flow pump and radiant gas cooler with condensate trap. An automatic shut-off activates when […]
Functioning as a durable handheld that fits in the palm of your hand or a case mounted analyzer, the ecom-D is built with our customers in mind. Powerful magnets on the back of the analyzer allow the technician to work hands free during any combustion analysis for increased efficiency. The ecom-D utilizes the newest technology and world-class engineering to push the limits of what is possible in compact, portable analyzers. Available with up to six sensors, this analyzer is engineered to adapt to our customers individual needs, and allows for custom configuration by adding optional features such as a thermal quick-printer for instant documentation, Wi-Fi data transfer and mini-gas cooler […]
ScanTemp 440 infrared thermometer is a non-contact infrared thermometer with a thermocouple connector that you are able to attach an assortment of type K thermocouple probes to measure core temperatures. The adjustable emissivity assures accurate measurements. For maintenance application the Audible and Visual HI-LO-ALARM is a very useful feature. For the infrared part, simply aim the thermometer at the target and press the measurement button to display the surface temperature in less than a second.
Single Wall Special Gas Vent: Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III, and IV gas appliances – with no RTV sealant required. AL29-4C® Stainless Steel 3” through 16” diameters Factory built-in silicone seal 3”-5” primarily for Residential applications Tested and Listed to UL1738/ULCS636 by Underwriters Laboratories, Inc Double Wall Saf-T Vent CI Plus is the leading commercial double-wall UL 1738 special gas vent system for condensing heating appliances, made from superferritic stainless steel. With 1″ airspace (and optional 1″ fiber blanket) between the inner wall and the outer wall, CI Plus reduces the required clearance to combustibles and has lower […]
Now available, Polyflue™, a unique polypropylene flue gas venting system for Category II and IV gas fired heating appliances. Polyflue has a much higher safety factor than PVC / CPVC plastic pipe used on these same heating appliances. Polyflue also provides faster and cleaner installations than PVC / CPVC. Polyflue can be sourced through HVAC and/or plumbing wholesale distribution channels. Polyflue is the ONLY polypropylene venting system that is listed by UL, Inc, to the complete ULC S636 test standard at 0” clearance to combustibles at 230°F / 110°C maximum flue gas temperature. It is also the ONLY polypropylene venting system that allows the required locking bands to be installed during or […]
JJM Boiler Works is a design and manufacturing business located in Easthampton, Massachusetts with over thirty-two years of experience in the boiler trade. Owned and operated by Denise and George Carney we offer the industry a solution for handling low PH levels of condensate produced by today’s high efficient gas boilers, hot water heaters and furnaces. Through our many engineering, contractor, wholesaler, representative and OEM contacts across North America we found an industry need for pH treatment of acidic condensate, a fireside condensate acid neutralizer. JJM Boiler Work’s tubes and tanks are offered for sale at the wholesale level, or through representatives throughout the U.S. and Canada.