CircuitSolver® is a self-actuating thermostatic balancing valve that automatically and continuously maintains a set water temperature at the end of each domestic hot water supply. It solves the problem of delayed hot water delivery while completely eliminating the need for time consuming, expensive manual balancing procedures and equipment. By allowing only fluid that cools below the set point to flow to the return, CircuitSolver®also eliminates the need for oversized recirculation pumps which lead to pipeline erosion and energy waste. Please visit circuitsolver.com for more information.
Drain water from commercial equipment exceeding 140°F can be costly – leading to failed inspections, fines, business interruptions, or injury and damage to personnel and equipment. ThermOmegaTech’s® Drain Tempering Valve (DTV) tempers excessively hot drain water to comply with international plumbing code temperature regulations. Thermostatic and completely self-operating, the DTV is plug-and-play, giving you one less thing to worry about. How It Works: The DTV tempering valve is installed into the drain line such that the hot effluent passes over the thermal actuator of the DTV which controls the cold water inlet port. If the hot effluent is above the specified set-point of the valve, the DTV opens to allow […]
The ESS water heater is a packaged system designed to meet the requirements of ANSI Z358.1-2014 for tepid water delivery to an emergency safety shower or drench system. This heavy-duty water heater is constructed of a carbon steel tank and internally lined with 1/2″ thick Hydrastone cement to ensure tank longevity when operating at elevated temperatures. It is fully insulated with 3″ thick polyurethane foam to minimize standby heat loss. This tepid water heater is equipped with a mixing valve specifically designed, tested, and proven for use in emergency safety shower/face/eyewash applications. The entire package including the mixing valve is factory piped and mounted to the water heater to provide […]