KN-Series boilers represent revolutionary engineering. The world’s first boiler to pair condensing performance with cast iron’s durability. No other boiler can match it point for point when it comes to set-up, maintenance, and long-lasting performance. Not one. All KN-Series cast iron sections are manufactured in the USA for durability and longevity by people with generations of foundry and manufacturing expertise in Boyertown, PA. All castings have precision machined ports for water tight joint seals and are rated at 100psi of working pressure. KN-Series boilers retain valuable latent heat energy for maximum efficiencies. Long life and dependability. Innovation sized to meet the modern day requirements of low fuel utilization, high efficiency, […]
Horizontal, ASME Storage Tanks Available with or without Spray-On Insulation The exterior of non-insulated tanks are painted with a red oxide primer. Insulated tanks are coated with a sprayed-on rigid insulation that has an acrylic topcoat. Tanks are constructed and certified in accordance with ASME IV, part HLW for 125 psi and 150 psi. 5 year tank warranty.
Vertical, ASME Storage Tanks Available with or without Spray-On Insulation The exterior of non-insulated tanks are painted with a red oxide primer. Insulated tanks are coated with a sprayed-on rigid insulation that has an acrylic topcoat. Tanks are constructed and certified in accordance with ASME IV, part HLW for 125 psi and 150 psi. 5 year tank warranty.
Insulated, Glass Lined Steel Potable Water Storage Tank with Steel Exterior FOUR 2-Inch NPT connections – ideal for circulating-loop applications. Factory installed brass drain valve. Standard 5 year tank warranty. Powder coated steel exterior jacket. Robust non-ASME construction.
Point of Use Commercial Electric Water Heater Built for Long-Term nDurance! Robust thick-gauge steel tank construction Glass fused-to-steel tank interior Dual anode rods for double protection against corrosion Zinc-plated copper sheath elements designed to minimize scale build-up FIVE-YEAR Warranty 135°F to 180°F adjustable temp control (125°F to 170°F range for single element models) Meets or exceeds ASHRAE 90.1 Factory installed Temperature & Pressure Valve
Oil-Fired Residential and Light-Commercial Water Heaters Bock water heaters are the USA’s most popular oil-fired residential and commercial oil-fired appliances. Capacities range from 32 gallons to 113 gallons with inputs from 104,000 to 623,000 BTU. The Bock® Model 32E water heater is the market leader in Energy Efficiency with a .63EF rating and 170 gallons First Hour Delivery. It meets the Department of Energy’s new higher energy standards coming in 2015 – no comparable competitive model meets those standards. Standard 5-year tank/heat exchanger residential warranty. Single Turboflue® helical-fin heat exchanger. Certified for use with Carlin® and Beckett® burners.
Oil-Fired Commercial/Industrial Water Heaters Eleven models ranging from 400,000 BTU to 1,500,000 BTU in 150, 200 or 250 nominal gallon sizes. ASME construction is standard on all models. Wet-leg design offers continuous operation and additional heat transfer capabilities. Feature Turboflue® helical finned heat exchangers. Equipped with Wayne® external burners or optional Carlin® burners.
Coil-Heat Exchanger Indirect Water Heater Single-wall full throat 1-1/2” diameter internal coil heat exchanger. 30, 38, 45, 75 and 110 gallon capacities. Factory installed Aquastat on all models. Factory installed T&P Relief Value and Brass Drain Valve. Standard 7 year residential tank and heat exchanger warranty with a FREE upgrade to a limited lifetime warranty. 3 year commercial tank/heat exchanger warranty.
Dual (upper and lower) Coil-Heat Exchanger Indirect Water Heater Two-coil indirect water heater is ideal for combination Domestic Hot Water and space-heating applications, or, use both coils in parallel to boost 1st hour performance up to 45% @ 200°F coil output. Single-wall full throat 1-1/2” diameter coil heat exchangers – upper and lower. 73 gallon and 108 gallon actual capacities. Standard 6 year residential tank and heat exchanger warranty; 3 year commercial warranty. 50SKE, 80SKE, 80SKDCE, 119SKE and 119SKDCE Models have 4500W electric heating element for supplemental heating when appliance is installed as solar-thermal water heater.
Vertical or Horizontal Large Volume Solar-Thermal Water Heater with Multiple Coil-Heat Exchangers Capacities ranging from 175 gallons to 1,040 gallons actual volume. Two to sixteen standard single-wall or optional double-wall internal coil heat exchangers (quantity subject to tank capacity). Foam insulation with rigid acrylic exterior finish. ASME construction. Five-Year warranty.
80%TE Power Direct Vent Commercial Gas Water Heater with Space-Heating Internal Coil Heat Exchanger Radiant heating and Domestic Hot Water combined in one appliance! Available in 75 and 100 gallon capacities – vents with 3” or 4” PVC, ABS or CPVC plastic pipe. Standard 5-year tank/heat exchanger commercial warranty. Single Turboflue® helical-fin heat exchanger provides 80% TE Domestic Hot Water. 180°F maximum settable temperature. Single internal coil heat exchanger provides heat for space-heating applications. Installation friendly ezFITdimensions, connections, and controls. Natural Gas or Propane Burners.
80% TE Power Burner Gas Commercial/Industrial Water Heaters Eleven models ranging from 400,000BTU to 1,500,000 BTU in 150, 200 or 250 nominal gallon sizes. ASME construction is standard on all models. Wet-leg design offers continuous operation and additional heat transfer capabilities. Feature Turboflue® helical finned heat exchangers. Equipped with Power Flame™ external burner.
80% TE Power Burner Gas Water Heaters Available in 32 to 113 gallon capacities with your choice of natural gas or LP gas burner. Standard 5-year tank/heat exchanger commercial warranty. Single Turboflue® helical-fin heat exchanger provides 80% Thermal Efficiency. Comes complete with a barometric draft control, spark ignition and 100% safety shut-off. Provided with Carlin® or Midco® powered burner.
80% TE Power Direct Vent Commercial Gas Water Heater Available in 75 and 100 gallon capacities and featuring 3” or 4” PVC, ABS or CPVC plastic vents. Standard 5-year tank/heat exchanger commercial warranty. Single Turboflue® helical-fin heat exchanger provides 80% Thermal Efficiency. 180°F maximum settable temperature. Installation friendly ezFIT dimensions, connections, and controls. Natural Gas or Propane Burners.
80% TE Atmospheric Gas Water Heaters A wide variety of models ranging from 250,000 to 725,000 BTU input with Natural Gas or Propane. All models feature electronic ignition and automatic damper. ASME or non-ASME construction. Low Profile selection of 80 and 100 gallon models available. Hand Hole Cleanout.
80% TE Atmospheric Commercial Gas Water Heaters Featuring installation friendly ezFIT dimensions, connections, and controls in your choice of Natural Gas or L.P. Available in 75, 80, 90 and 100 gallon capacities and inputs ranging from 76,000 to 199,000 BTU/HR. Standard 5-year tank/heat exchanger commercial warranty. Single Turboflue® helical-fin heat exchanger provides 80% Thermal Efficiency. 180°F maximum settable temperature. Low NOx emissions (SCAQMD certified) standard with EZ75-135N, EZ80-156N, EZ80-199N and EZ100-199N models.
High Efficiency Condensing Low-NOx Commercial Gas Water Heaters Available in 60 gallon capacity with natural gas low NOx premix power burners which are SQAQMD compliant, or with an LP gas burner. The HEC also features electronic ignition and controls.
Modulating Condensing Ultra Low NOx Commercial Gas Water Heater optiTHERM is a fuel-saving, long-lasting, minimal maintenance gas commercial water heater engineered and built to offer Lowest Total-Cost Hot Water™ Modulating Blue Flame Submerged Burner optimizes thermal efficiency. Automatic ICCP corrosion protection system minimizes maintenance costs – eliminates sacrificial anodes. 99, 100 gallon or 125 gallon capacities Natural gas or propane Ultra-robust materials and construction maximize longevity. Ultra-Low NOx emissions are SCAQMD certified. Standard 5-year tank/heat exchanger commercial warranty.
The ESS water heater is a packaged system designed to meet the requirements of ANSI Z358.1-2014 for tepid water delivery to an emergency safety shower or drench system. This heavy-duty water heater is constructed of a carbon steel tank and internally lined with 1/2″ thick Hydrastone cement to ensure tank longevity when operating at elevated temperatures. It is fully insulated with 3″ thick polyurethane foam to minimize standby heat loss. This tepid water heater is equipped with a mixing valve specifically designed, tested, and proven for use in emergency safety shower/face/eyewash applications. The entire package including the mixing valve is factory piped and mounted to the water heater to provide […]
The Ultimate Filtration Solution High Performance Air, Dirt and Magnetite Separator BM/R Our tried and trusted patented magnetic technology ensures that virtually 100% of ferrous oxide and scale is removed on first pass. This heating system filter offers major benefits: Install/Clean in minutes, protects for years Dual flow technology – filters twice on one pass Includes automatic air vent to automatically release trapped air Guaranteed no block Removes both magnetic and non-magnetic debris Fits in line and has 360º adjustment Easy access for chemical dosing Features 1″ NPT (1.25″ NPT adaptors included) or 1″ Press Connections
High Performance, Cost Effective Magnetic Filter Ideal for medium sized commercial, retail or large residential properties, BoilerMag XL prevents the build-up of ferrous oxide and scale in central heating systems, reducing energy bills and increasing boiler life. Utilising our high performance dual flow technology, BoilerMag XL ensures that virtually 100% of unwanted debris is removed from the system. Easy to install and clean Fits standard 1½” connections Dual flow technology – filters twice on one pass Guaranteed no block Removes both magnetic and non-magnetic debris High collection capacity Comes with BoilerMag 10 year warranty Operates at up to 174 psi
Commercial Heating System Protection Ideal for large heating systems, BoilerMag XT prevents the build-up of iron oxide (black sludge) and scale in hydronic heating systems, reducing energy bills, increasing boiler life and reducing maintenance call outs. Utilizing our high performance full flow technology, BoilerMag XT ensures that virtually 100% of unwanted debris is removed from the system. Easy to install and maintain Maintains optimum heating performance Range available from 1.5” to 12” Operating pressure up to 174 PSI High intensity magnetic rods capture even the smallest particles Large collection capacity Comes with BoilerMag 10 year warranty No on-going running costs Premium quality manufacture Automatic air vent Full flow filter
The BM1 is a high performance formula used in many properties. It maintains heating efficiency by preventing scale formulation and metal corrosion, without any detrimental effects upon plastic or rubber plumbing components such as seals. The Borate/Phosphate free BM1 formula provides outstanding heating system protection with none of the adverse effects associated with traditional protection products. Outstanding, long lasting protection Maintains heating efficiency Compatible with all leading boiler types (including aluminum heat exchangers) Prevents radiator cold spots and boiler damage Phosphate and Borate free formula Nitrate/EDTA free formula – prevents metal corrosion Build Cert approved Ideal for sealed or vented systems A single Pint (500ml) treats 25 Gallons Non-toxic, environmentally […]
Developed by one of the world’s leading chemical laboratories, the Phosphate-free BM3 formula provides premium system cleaning performance. The BM3 formula delivers superior system cleaning results and, by using the BM3 test strips, allows the service engineer to get a detailed reading of cleaner levels in the system. Premier, fast acting formula Excellent Limescale and Iron Oxide dispersal rates Compatible with all flushing equipment Ideal for sealed or vented systems A Pint (500ml) bottle cleans 25 Gallons Easy application, system can be left running during cleaning Non-toxic, environmentally friendly Use in conjunction with a BoilerMag magnetic filter and BM1 Inhibitor to maximize heating efficiency
Premium Protection Against Limescale Why Install an Electrolytic Scale Reducer? A combination of copper and zinc metals inside the unit emit charged zinc ions when water flows through it. This induces hardness salts to cluster together and therefore pass through heating appliances rather than forming limescale deposits on the heat exchanger or water heating element. This extends the lifespan of the boiler and improves heating efficiency. Minimizes limescale deposition Improves boiler efficiency and lifespan Simple installation Fit and forget – zero maintenance 145 psi working pressure One-year replacement guarantee Suitable for 3/4″ NPT pipes
Functioning as a durable case mounted analyzer, the ecom-B is built for boiler tuning and efficiency. Powerful magnets on the back of the analyzer allow the technician to work hands free during any combustion analysis for increased efficiency. Like all of our analyzers the ecom-B utilizes the newest technology and world-class engineering, ensuring your testing is easy and accurate. Available with up to three sensors, this ready to run analyzer has everything you need in one compact, robust and easy to use carry case.
The ecom-B Plus is an easy to use handheld gas analyzer designed for commercial and industrial combustion monitoring in a variety of applications. It can be fitted with up to 3 gas sensors, measuring O2, CO & NO, plus STACK and AMBIENT temperatures, and STACK Pressure and Draft. The ecom-B Plus also calculates CO2, Efficiency, Losses, Excess Air and Oxygen correction 0-20%. The instrument with its aluminum housing and ergonomic handle has been designed for rugged field use. On board data storage allows for up to 300 separate readings. Its integrated thermal quick printer allows for on the spot print outs. The on-board computer has 5 pre-programmed fuel types and […]
The ecom-CL 2 – the perfect combination of wall positioned and floor standing instrument. It is an easy to use gas analyzer designed for commercial combustion monitoring in a variety of applications. The ecom-CL 2 is fitted with up to 3 gas sensors, measuring O2, CO & NO, plus STACK and AMBIENT temperatures, and STACK Pressure and Draft. The ecom-CL 2 also calculates CO2, Efficiency, Losses, Excess Air and Oxygen correction 0-20%. The on-board computer has 5 pre-programmed fuel types and can store up to 16. The ecom-CL 2 sample conditioning system consists of a high flow pump and radiant gas cooler with condensate trap. An automatic shut-off activates when […]
Functioning as a durable handheld that fits in the palm of your hand or a case mounted analyzer, the ecom-D is built with our customers in mind. Powerful magnets on the back of the analyzer allow the technician to work hands free during any combustion analysis for increased efficiency. The ecom-D utilizes the newest technology and world-class engineering to push the limits of what is possible in compact, portable analyzers. Available with up to six sensors, this analyzer is engineered to adapt to our customers individual needs, and allows for custom configuration by adding optional features such as a thermal quick-printer for instant documentation, Wi-Fi data transfer and mini-gas cooler […]
ScanTemp 440 infrared thermometer is a non-contact infrared thermometer with a thermocouple connector that you are able to attach an assortment of type K thermocouple probes to measure core temperatures. The adjustable emissivity assures accurate measurements. For maintenance application the Audible and Visual HI-LO-ALARM is a very useful feature. For the infrared part, simply aim the thermometer at the target and press the measurement button to display the surface temperature in less than a second.
50 MBH to 1,500 MBH (1.5 BHP to 44 BHP) @ 99.5% efficiency Developed specifically to fit through a 30” door, the standard PCW’s compact footprint can fit where a fuel-fired boiler cannot. When extra options require a larger cabinet, Precision can customize the assembly to supply the boiler in a ‘knock-down’ condition to preserve the design advantages that make the PCW ideal for retrofits, or where venting a fuel fired boiler is not an option.
1,638 MBH to 8,735 MBH (48 BHP to 260 BHP) @ 99.5% efficiency Nearly identical in design and operation to the PCW, but in a larger footprint to deliver higher heating capacity utilizing a horizontal vessel configuration. Like the PCW, standard models can be customized to meet unique installation and control requirements. It can be installed where venting a fuel-fired boiler is not an option. The HW can be configured to communicate with any building management system.
330 MBH to 4,100 MBH (9.5 BHP to 120 BHP) @ up to 86% efficiency Traditional vertically configured fire-tube design with better overall efficiency due to under-fired power burner. In addition to the simplicity of the 4-piece design, the FPH includes many advantages over other vertical configured boilers. For example, its larger water volume results in both a low pressure drop thru the unit and reduced cycling, to improve overall efficiency.
860 MBH to 17,220 MBH (25 BHP to 500 BHP) up to 86% efficiency Flex-tube forced draft design offers high fuel-to-output efficiency in a compact, maintenance-friendly design that harnesses natural heat convection to ensure consistent internal heat distribution and complete internal water circulation. Noted for their small footprint compared to a horizontal fire-tube, the FTH accommodates up to 150oF temperature differences from the supply and return, and offers virtually instantaneous hot water. The FTH can be configured to communicate with any building management system. Other available options include construction under ASME Section I/VIII for high temperature hot water applications.
100 PPH to 10,000 PPH (10 BHP to 300 BHP) @ 99.5% efficiency Despite its compact footprint, the Model ST’s large steam chest delivers high quality, dry steam with minimum carryover. Fuel-oil or propane boiler retrofits are simpler with a Precision Model ST that requires no vent stack or combustion air louvers and can be supplied in a ‘knock-down’ condition to fit through narrow entries to the old boiler room. The standard ST models can be customized with a variety of factory installed options or configured to connect with field mounted interfaces, giving you exceptional flexibility in design and specification. Adding an SCR creates a boiler with 100:1 turndown to […]
330 PPH to 3,440 PPH (9.5 BHP to 100 BHP) @ up to 83% efficiency Raditional vertically configured fire-tube design with better over-all efficiency due to a bottom-fired power burner. In addition to the simplicity of the 4-piece design, the FPS includes many advantages over other vertically configured boilers, including: large water volume and steam chest that reduces cycling, and an internal feedwater pre-heater to improve overall efficiency and reduce the risk of thermal shock.
863 PPH to 17,255 PPH (25 BHP to 500 BHP) up to 85% efficiency Flex-tube forced draft design offers high fuel-to-output efficiency in a compact, maintenance-friendly design that harnesses natural heat convection to ensure consistent internal heat distribution and complete internal feedwater circulation. The upper steaming chamber is connected to the lower feedwater return vessel via individual serpentine configured carbon steel tubes, to form a 5-pass heat transfer area of 5 sq. ft. per BHP. Separate down-comers connect the upper and lower vessels outside the boiler cabinet to optimize natural circulation and heat transfer.
The most customized solution available, our ‘boiler room on a skid’. This complete steam generating system is custom designed by Precision’s engineering team: pre-piped and pre-wired with controls on a common base, fully functioning and factory tested. The skid packaged steam system simplifies procurement with one-source equipment purchasing, saves time and increases efficiency by reducing uncertainty and potential delays. With Precision skid packs on the job, there’s no need to hire a third-party engineer, coordinate multiple vendor production schedules, or schedule multiple deliveries, with the associated crane rental costs.
100 PPH to 10,000 PPH (10 BHP to 300 BHP) @ 99.5% efficiency When specification calls for higher pressure process steam (> 200 psi operating), the STH delivers high quality process steam in a compact footprint. Custom models can be supplied in a ‘knock-down’ option to fit narrow entries. Optional SCR control provides near infinite modulation to precisely follow heating load. Requires no vent stack, breeching, or combustion air louvers. The STH is perfect for high pressure process steam installations, and saves time and money, with no need for custom ventilation.
2,700 PPH to 140,000 PPH (80 BHP to 4,200 BHP) @ 99.5% efficiency The HVJ is configured to operate from one of three different 3-phase power supplies: 4160 volt, 6900 volt, and 13.2 KV, and its standard operating pressures range from 100 psi to 400 psi; for higher pressure models consult factory. Particularly well-suited as an auxiliary boiler for power generation facilities and central steam plants, or as a pony boiler for industrial process expansions or additions. The HVJ provides virtually instant steam when needed, ramping up from standby to full output in minutes or even seconds, and can dramatically reduce energy costs using off-peak power. It is commonly used […]
Provides super-heated steam for high temperature process or power generation applications. ISH electric instantaneous superheaters are custom designed to fit nearly any steam re-heat requirement. Standard SCR control provides near infinite modulation to maintain steam set-point temperature. Requires no vent stack, breeching, or combustion air louvers.
20 gallons to 950 gallons, support 15 BHP to 720 BHP size boilers Non-code condensate receiver tanks are recommended when there is a high rate of condensate return and minimal make-up water is required. Our CF systems are designed to receive condensate and prepare it for return to the boiler. They can also be paired with a DA to accommodate condensate surges that would otherwise be lost through the DA’s overflow drain. Precision CF systems are custom designed to include the appropriate pump and control packages that best fit the application requirements.
Spray deaeration-5,000 PPH to 300,000 PPH Storage-140 nominal gallons to 6,000 nominal gallons of feedwater to overflow Deaerators (DAs) are recommended when the steam system requires significant volumes of make-up water that must be treated to remove free oxygen and carbon dioxide from boiler feedwater. Precision’s Spray-Type DA relies on internal spray valves, a vent condenser, and fresh steam to create conditions by which the make-up water releases the O2 and CO2 naturally, reducing the consumption of costly oxygen scavenging chemicals otherwise required to prevent corrosion leading to premature steam system failure.
Tray deaeration-5,000 PPH to 500,000 PPH Storage-110 gallons to 10,000 gallons of feedwater to overflow Deaerators (DAs) are recommended when the steam system requires significant volumes of make-up water that must be treated to remove free oxygen and carbon dioxide from boiler feedwater. Precision’s Tray-Type DA is the best choice for large stream flows where limited condensate return creates a large demand for makeup water. The Tray Type DA relies on internal spray valves, a cascading series of trays, a vent condenser, and fresh steam to create conditions for large flows of make-up water to release the O2 and CO2 naturally. Investing in a Tray-DA reduces dramatically the consumption of […]
Precision chem feed packages offer an extra measure of protection against corrosion and scaling in your steam system, to maintain peak efficiency and improve the performance of your entire boiler package. When treatment chemicals are required to protect your boiler system, our chem feed packages save time and money with complete packages and easy installation.
20 gallons to 950 gallons, support 15 BHP to 720 BHP size boilers Usually paired with a deaerator to provide additional condensate storage capacity when operating conditions cause a sudden surge of condensate return that would otherwise overwhelm the storage capacity of the DA and be lost through the overflow to the drain. Our Surge Tanks are essentially CF packages without the preheater. Precision surge tanks are pre-mounted, piped, and wired condensate receiving storage tanks, with a float activated make-up water valve that adds fresh water to replace condensate lost through the steam loop to maintain sufficient water level inside the tank.
30 gallons to 1,200 gallons The Precision standard, used where there is ample space for a large tank to collect and hold boiler blowdown, allowing the effluent time to cool below 140oF before releasing it to the facility drain. The portion of blowdown that flashes to steam vents to atmosphere or can be recovered to preheat boiler feedwater.
10 gallons to 50 gallons, suitable for boiler operating pressure up to 800 psi A blowdown separator is the best choice when space limitations preclude using a large tank to collect and hold the effluent while it cools to an acceptable drain temperature. The blowdown separator accepts boiler blowdown, vents the portion that flashes to steam, but does not store the effluent until it cools. Instead, a temperature controlled mixing valve mounted in the tank’s discharge piping adds cold make-up water to cool the effluent as it immediately discharges to the drain.
125 gallons to 5,000 gallons When you need a lot of domestic hot water, quickly and reliably. The HWS commercial volume storage water heater is designed for industrial, commercial and institutional users who require large quantities of service water at preset temperatures. Two different NSF-61 compliant lining options are available: our standard PS lining is a two-part epoxy that delivers service performance that is superior to glass; the aluminum silica cement is recommended for water temperatures above 190oF and offers the longest service life. Standard models are configured with a vertical vessel; horizontal models can be ordered.
100 gallons to 1,500 nominal gallons Conventional fire-tube construction in a water heater design. The FPW offers 84% efficiency with reduced burner cycling, proven fire-tube reliability, simple installation, and easy access for servicing with its simple 4-pc. design.
125 gallons to 4,000 gallons of actual capacity; contact us for larger options available The PHWS uses existing thermal energy sources to heat domestic hot water. The vessel is fitted with a shell-and-tube heat exchanger that accepts either process steam or high temperature hot water to heat the potable water stored inside the NSF-61 compliant vessel. For ease of installation, the heater is shipped fully assembled and ready to use with all the accessories factory-sized, pre-piped and pre-wired. The PHWS saves time, money and manpower that would otherwise be used to a install separate fuel-burning device inside the facility .
125 gallons to 5,500 gallons of actual capacity; contact us for larger options available A storage or buffer tank for every need. With a wide variety of available options, Precision provides flexible solutions to your specific storage tank needs. In addition to easily meeting a variety of requirements, Precision tanks offer the unique ability to be used as a buffer or chilled water tank, when configured with a baffle mounted in the center of the tank. All Precision storage tanks can be furnished with insulation and jacketing for heat loss prevention and maximum thermal efficiency. A properly insulated tank may reduce the size of the storage capacity required to meet […]
RBI 8800 Series domestic hot water heaters and boilers provide reliable, efficient operation in a wide variety of commercial applications. Hot water heaters are ideal for applications with load diversity such as apartments/condominiums. The 8800 Series is also suitable for hotels, schools, hospitals, laundries and car washes – wherever a large volume of hot water is needed. High quality construction, quiet operation and a variety of control options also make the 8800 Series the perfect choice for hydronic heating applications with fast response, load matching and energy efficiency. Quality Construction for Dependable, Efficient Performance Integral, 2-pass heat exchanger and standard bronze headers ensure long-life performance and years of worry-free service. […]
RBI 8900 Series atmospheric combustion units offer thermal efficiencies of 81% and are the most durable and serviceable boilers on the market. They offer a wide 420 to 1,900 MBH size range for applications from car washes to office buildings. All models come with intermittent pilot ignition, adjustable high limit, and 24V gas valve with either single-stage or two-stage firing. A motorized gas valve for modulation firing is also available. Ease of installation and service are trademarks of all RBI water heaters and boilers. Critical components are fully accessible, including slide out burner tray and heat exchanger to make short work of service and maintenance calls. Inspection and replacement of […]
The Dominator™ Series from RBI, with sizing from 300 to 2,100 MBH, offers the ultimate flexibility in boiler and water heater application, all at a competitive price. With efficiencies nearing 85.1%, the Dominator has one of the highest efficiency levels available in non-condensing boiler and water heater market. Capable of operating using mechanical room air for combustion or by drawing outside air directly as a sealed combustion product, the Dominator can vent combustion gases vertically or horizontally with factory equipped draft-inducer kits. In commercial boiler applications where mechanical space is limited, the Dominator’s stackable frame option allows units to be stacked two-high, adding valuable BTUs while keeping the footprint to […]
Flexcore Symmetrical Firetube boilers bring hydronic heating products to unprecedented levels of operating efficiency. Unlike other manufacturers; from start to finish the Flexcore was designed, developed and engineered by the experts at RBI. Engineered for performance and longevity the Flexcore utilizes a perfectly temperature balanced heat exchanger that provides not only the highest efficiencies but also a durability beyond that of any competitive firetube boiler on the market. Features and Benefits: Up to 99% Maximum Efficiency 95%+ AHRI Certified Symmetrical Firetube Heat Exchanger Variable Volume Flow Full Modulation Patented “Turbo Pilot” Ignition HeatNet 3.0 Integrated Control Platform Touchscreen Programming & Diagnostics Low NOx & CO Modern Jacket Design Premium Efficiency […]
The Futera II Series boilers and domestic water heaters provide non-condensing thermal efficiencies of 85%. All sizes from 500 to 1,950 MBH are fully packaged and fit through a standard 30″ doorway for quick and easy installation. The Futera II provides a high concentration of BTU’s in a small footprint, making it an excellent choice for jobs where mechanical space is limited, as well as modular step-fired applications. Futera II Series boilers and water heaters are also available with corrosion-resistant, brushed stainless steel jacket. Ideal for outdoor or indoor installation in harsh environments such as coastal areas and processing applications requiring wash down. The Futera II Series offers maximum flexibility. […]
The gas-fired Futera III brings the field-proven performance of Futera boilers and water heaters to even higher levels of efficiency and reliability. Featuring full modulation with 4:1 turndown, the Futera III supplies the precise amount of heat necessary to maintain desired building temperature by matching heating demand without over-firing and wasting energy. These dependable, easy-to-service boilers feature rugged construction and sleek, stainless steel jacket design. Models range from 500-1999 MBH. If you’re looking to maximize efficiency, reliability, and flexibility in domestic hot water and hydronic heating applications, the Futera III is your heating solution. Please visit rbiwaterheaters.com/Futera3 for more information.
The gas-fired Futera Fusion™ and Fusion XLF now brings the field-proven performance of Futera III and XLF Modulation boilers and water heaters to the ultimate levels of efficiency and reliability. This innovative design is the ideal choice for applications with low operating, return, or make-up water temperatures. Unlike most condensing products available today which publish the highest efficiencies at the lowest inputs, the Fusion is capable of attaining efficiencies as high as 98% at Full Input! The full modulation firing system continuously varies the energy input to precisely match heating load without over-firing and wasting fuel. This provides extremely high part-load efficiencies. System sizing is made simple with models available […]
The Futera XLF is designed with 5:1 turndown, up to 88% efficiency, and backed by RBI reliability and ease of service. The Futera XLF features integral HeatNet® control that can act as a boiler management system, networking up to sixteen units without requiring any external control panel. Such advanced performance in such a small space – double the power in the same compact dimensions – can benefit older boiler systems by adding contemporary efficiency for either heating systems or domestic hot water. For new construction, Futera XLF makes possible a modular configuration that is unmatched for output relative to size. It can even be networked with other boiler types, including […]
HeatNet, RBI’s proprietary integrated boiler management system is the driving force behind RBI’s energy optimization philosophy for its high efficiency equipment and is standard equipment on all Fusion and Futera (XLF & III) Air-Fuel coupled products. Designed for precise system control, Heat Net provides repeatability and feedback thru digital communication. The control monitors boiler temperatures and limit circuit inputs, maintains system and domestic hot water requirements, supports boiler room components including system/domestic pump, boiler pump, combustion air damper and modulates boiler firing rate to maximize turndown ratios in order to maintain peak efficiency. Please visit rbiwaterheaters.com/HeatNet for more information.
Part of RBI’s stainless steel line of high-efficiency boilers and water heaters, Infinite Energy² is available from 199 to 1000 MBH, providing flexible solutions for all of your heating and domestic hot water system needs. Utilizing state-of-the-art Radial Variable Circulation (RVC) stainless steel heat exchangers, IE² maximizes heat transfer with operating efficiencies up to 98%. Using all of today’s modern technologies, including pre-mix burners, modulating firing rates up to 20:1 and integrated cascade controls, IE² offers superior performance and application flexibility. Units are PVC, polypropylene and stainless steel vent capable and can be installed in multiple unit configurations using its on-board boiler control configuration – providing flexible modulation for maximum […]
RBI is very excited to introduce our first inverter driven air-to-water heat pump. Perfect for light commercial and commercial applications, our air-to-water heat pump encompasses all of today’s hydronic equipment innovations. Heat pumps absorb low-temperature heat from outside air and deliver higher temperature heat to an emitter inside the occupied space using water as the heat transfer medium. When cooling, heat pumps reverse the cycle and deliver chilled water through the same emitter. Please visit rbiwaterheaters.com/commercial-heat-pumps for more information.
The LCD Dominator™ Series from RBI offers a competitively priced indoor/outdoor unit that meets the low NOx requirement, while maintaining superior performance and serviceability. The LCD provides dependable performance in rugged environments and process applications, with a wide 225 – 2300 MBH range. At the heart of the unit is a sealed combustion chamber that provides the flexibility of using outside air or mechanical room air for combustion. Priced in line with the atmospheric category heaters, the LCD features smaller vent sizes, resulting in a lower total installation cost. Please visit rbiwaterheaters.com/DominatorLCD for more information.
The Spectrum Series boilers and water heaters offer the highest thermal efficiency available in atmospheric combustion today and is the only product in its size range, which uses 7/8″ inside diameter, finned copper tubes in the heat exchanger. Larger diameter tubes handle higher flow rates and provide longer service life than competitive models that use 5/8″ tubes. They are available as residential heating boilers or light commercial water heaters from 100,000 to 399,000 BTU’s. Spectrum Series boilers and water heaters are available with corrosion-resistant, brushed stainless steel jackets which makes them ideal for outdoor or indoor installation in corrosive or harsh environments. The Spectrum’s diagnostic control panel for easy troubleshooting […]
RBI storage tanks are designed to provide large volume, continuous or intermittent hot water supply while maintaining a constant outlet temperature. Ranging in size from standard 200 to 1,000 gallon capacities to custom-built 3,000-gallon units, RBI hot water storage tanks offer complete application flexibility and are the perfect complement to RBI’s high-efficiency boilers and hot water heaters. Please visit rbiwaterheaters.com/StorageTanks for more information.
Torus boilers and water heaters bring next level performance in a small compact footprint to today’s applications. The RBI tradition of high quality, performance equipment in a user-friendly design continues with Torus. Incorporating all industry-proven components including HeatNet 3.0 touchscreen cascade control and our Tru-Flow fuel/air coupling system and capacities to 4000 MBH Torus has the solution for all commercial installations. Please visit rbiwaterheaters.com/torus for more information
Smith 19HE Series boilers are ideal for light commercial hot water or steam heating systems. Sharing all of the features of its larger cousin 28A series commercial boilers, ten different sizes are available ranging from 308 MBH to 1750 MBH with high efficiencies. Please visit smithboiler.com/Smith-19HE for more information.
Smith Cast Iron Boilers has taken the field-proven design of RTS series commercial boilers to even higher levels of performance and efficiency with RTS HE series, high-efficiency boilers. Smith’s flexible cast iron in combination with our Return Temperature Stabilizer equalize water temperatures to minimize stress and extend boiler life. Available in fifteen sizes ranging from 931 to 4,622 MBH, Smith RTS HE series water boilers are designed to provide the highest combustion and thermal efficiencies possible with forced draft firing. Please visit smithboiler.com/Smith-28HERTS for more information.
Smith Cast Iron Boilers has taken the field-proven design of 28A series commercial boilers to even higher levels of performance and efficiency with 28HE series, high-efficiency boilers. Available in fifteen sizes ranging from 931 to 4,622 MBH, Smith 28HE series steam boilers are designed to provide the highest combustion and thermal efficiencies possible with forced draft firing. Please visit smithboiler.com/Smith-28HE for more information.