125 gallons to 5,500 gallons of actual capacity; contact us for larger options available A storage or buffer tank for every need. With a wide variety of available options, Precision provides flexible solutions to your specific storage tank needs. In addition to easily meeting a variety of requirements, Precision tanks offer the unique ability to be used as a buffer or chilled water tank, when configured with a baffle mounted in the center of the tank. All Precision storage tanks can be furnished with insulation and jacketing for heat loss prevention and maximum thermal efficiency. A properly insulated tank may reduce the size of the storage capacity required to meet […]
Archives for March 2017
PHWS Indirect Fired Water Heater
125 gallons to 4,000 gallons of actual capacity; contact us for larger options available The PHWS uses existing thermal energy sources to heat domestic hot water. The vessel is fitted with a shell-and-tube heat exchanger that accepts either process steam or high temperature hot water to heat the potable water stored inside the NSF-61 compliant vessel. For ease of installation, the heater is shipped fully assembled and ready to use with all the accessories factory-sized, pre-piped and pre-wired. The PHWS saves time, money and manpower that would otherwise be used to a install separate fuel-burning device inside the facility .
FPW Vertical Firetube Water Heater
100 gallons to 1,500 nominal gallons Conventional fire-tube construction in a water heater design. The FPW offers 84% efficiency with reduced burner cycling, proven fire-tube reliability, simple installation, and easy access for servicing with its simple 4-pc. design.
HWS Electric Commercial Water Heater
125 gallons to 5,000 gallons When you need a lot of domestic hot water, quickly and reliably. The HWS commercial volume storage water heater is designed for industrial, commercial and institutional users who require large quantities of service water at preset temperatures. Two different NSF-61 compliant lining options are available: our standard PS lining is a two-part epoxy that delivers service performance that is superior to glass; the aluminum silica cement is recommended for water temperatures above 190oF and offers the longest service life. Standard models are configured with a vertical vessel; horizontal models can be ordered.
BDS Blowdown Separator
10 gallons to 50 gallons, suitable for boiler operating pressure up to 800 psi A blowdown separator is the best choice when space limitations preclude using a large tank to collect and hold the effluent while it cools to an acceptable drain temperature. The blowdown separator accepts boiler blowdown, vents the portion that flashes to steam, but does not store the effluent until it cools. Instead, a temperature controlled mixing valve mounted in the tank’s discharge piping adds cold make-up water to cool the effluent as it immediately discharges to the drain.
- 1
- 2
- 3
- …
- 5
- Next Page »